FoundationsFramingTurnkey buildsScroll to walk inLicensed & bonded · CSLB #1163823
Inside
Poured, framed and finished under one accountable builder.
Move over the room to see the frame behind the finish.Tap See the frame for what sits behind the finish.
X-rayThe frame behind the finish
Footing and rebarKitchen remodelCourtyard home framingGround-up ADUHillside site prepWhite oak doorsDetached garageVaulted porch ceilingRaised floor postsWaterfront patioPlank ceilingDetached garage
What we specialize in
We build the parts of a housethat can’t be fixed later
Most of the building you see photographed is the last ten percent. We work in the first thirty, the part every finish above it depends on.
Footings
Subfloor
Layout
Framing
Sheathing
Weather barrier
Our services
Seven ways we build,one builder on site
Foundations and framing first, then everything a house needs. Drag through them, or open one to see what it covers.
20 projects, from footings and framing to finished rooms.
Finished rooms
Rooms we finished,built to last
Every room starts with what’s behind the walls. These are a few we took from the studs to the last coat.
Kitchen remodel
Shaker cabinets, a long island wrapped in wood slats, white oak flooring
Living room and stair
A new wall framed and sheathed beside the stair, the ceiling opened up during the work
Ground-up ADU
Bath with a large-format tile tub surround, matte black fixtures and a grid shower door
White oak doors
Natural white oak doors with matte black levers and hinges
Vaulted porch ceiling
Tongue-and-groove wood ceiling with timber beams over a porch
Backyard and outdoor kitchen
White brick outdoor kitchen with concrete counters and a stainless grill
Marble shower
Arched walk-in shower in white marble with a diamond-pattern niche and a mosaic floor
01 / 07
How we work
We walk it, scope it,price it by the task
We don’t hand you one number. We define the work, price it task by task, and put all of it in writing before it starts.
01 · Walk it
Walk the project
We visit the property, look at the existing conditions, take measurements and photos, and listen to what you want from it.
02 · Scope it
Scope and plan it
We define the work, the materials and the permits it needs, and bring in the designer or engineer when the job calls for one.
03 · Price it
Price it by the task
The job is broken into tasks, each with what’s included, its cost and what you get. Open selections carry stated allowances.
Task-by-task estimateSample
01Protection and demolitionA clean, open area ready to build$ left blank
02Framing and structureA sound structure, ready for rough-in$ left blank
03Rough plumbing and electricalSystems in, inspected, ready to close$ left blank
04FinishesA finished space, ready to use$ left blank
05Close-outA signed-off, complete project$ left blank
Project total$ left blank
Your estimate is built from your walkthrough.
04 · Sign it
Put it in writing
Scope, price, payments and schedule go into a written agreement. Permits are in hand before that work starts.
Meet the builder
One builder,on every job site
Aaron Hernandez founded JR Builds Renovations & Designs after years in the trades, learned on job sites rather than in a sales office. He still runs layout, checks the framing and walks every project himself.
That is the difference between a builder and a broker. We don’t subcontract a job and step away: we plan it, coordinate it and stay on it until the final walkthrough.
On site, not on the phone
Aaron walks every project himself and checks what gets covered up.
A network of trusted trades
Tradespeople, architects and engineers we have built with before.
Straight answers
Progress shared with photos, and decisions asked for before they stall the job.
10 mi20 mi30 mi40 miPacific OceanSan Gabriel MountainsGlendoraMost of our workPasadena16 miRancho Cucamonga16 miLong Beach32 mi
Where we build
From Glendoraacross LA County
Most of our work is in Glendora and across Los Angeles County, from Pasadena to Long Beach, and east to Rancho Cucamonga. Pick a city to see how far it is.
Miles are straight-line from Glendora, not drive times.
Most projects that change structure, add space, or install or rework electrical, gas, mechanical or plumbing systems need one. The California Residential Code exempts a short list: painting, tile, carpet, cabinets, countertops and similar finish work, fences up to 7 feet, retaining walls up to 4 feet with nothing loading them, and one-story detached sheds up to 120 square feet. Your city can add its own rules. We identify the permits during scoping and get them before that work starts.
02Can I build an ADU on my lot?
On a lot with a single-family home in a residential zone, state law has the city or county approve a converted ADU and a junior ADU inside the house or an existing accessory structure, plus a new detached ADU of up to 800 square feet with four-foot side and rear setbacks. Detached ADUs can go up to 1,200 square feet where local rules allow, and a city can’t set its maximum below 850 square feet. The review is ministerial, with no hearing. We walk the lot first to see what fits and what the site adds.
03How do I check a contractor’s license?
Search the contractor’s license number, business name or name at cslb.ca.gov, or call 800-321-CSLB (2752). The page shows whether the license is current and active, its classifications, the $25,000 contractor’s bond, and workers’ compensation coverage or an exemption. Make sure the name matches the one on your contract.
04How much do I pay up front?
On a home improvement contract, California caps the down payment at $1,000 or 10 percent of the contract price, whichever is less. After that, each payment has to match work completed or materials delivered, on a written schedule. We tie payments to defined phases on every project.
05How does a task-by-task estimate work?
We break the project into tasks or phases, each with what’s included, its cost and what you have when it’s done. Selections you haven’t made yet carry allowances, and exclusions and assumptions are listed. Approved scope, price, payment terms and schedule then go into a written agreement.
06Who will be on site, and who do I talk to?
Aaron Hernandez, our founder and builder, is on site running layout, checking framing and inspecting the work before it’s covered up. One point of contact manages the schedule, selections, site and quality checks from the first walk to the punch list. For specialty trades, we coordinate trade partners from a network we’ve built with tradespeople, architects and engineers.
07What areas do you serve?
Pasadena, Glendora, Long Beach, Rancho Cucamonga and communities across Los Angeles County. Most of our work is in Glendora and LA County.
Free estimate
Tell us whatyou want to build
Three short steps. We call you back to set up a walk of the project, then price it task by task.